Enquiry Form

Polishing Accessories

Showing 1-36 of 88 results

per page
View as
  1. 9.45520/100 RUPES Adhesive Disc for Denibbing - 35mm - P2000 - 100pcs

    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
  2. Microfibre pads main advantages compared to “standard” foam pads:

    • Microfibre features substantially more surface area per square in/cm compared to foam materials or moreconventional fibres like wool.
    • The firm polyurethane molded substrate provides a consistent support behind the microfibre textile forbetter leveling of defects.

    Recommended applications for Microfibre Pads:

    • On hard paints.
    • Paint with severe defects or deeper scratches.
    • In situations where faster defect removal is desired.

    Applications not recommended for Microfibre Pads:

    • Under-cured or on fresh paints
    • Gel coat due to the high rate of pad loading (material removal clogs pad prematurely)
    • Thin paints where the microfiber could be too aggressive
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
  3. 9.45530/100 RUPES Adhesive Disc for Denibbing - 35mm - P3000 - 100pcs

    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
  4. Microfibre pads main advantages compared to “standard” foam pads:

    • Microfibre features substantially more surface area per square in/cm compared to foam materials or moreconventional fibres like wool.
    • The firm polyurethane molded substrate provides a consistent support behind the microfibre textile forbetter leveling of defects.

    Recommended applications for Microfibre Pads:

    • On hard paints.
    • Paint with severe defects or deeper scratches.
    • In situations where faster defect removal is desired.

    Applications not recommended for Microfibre Pads:

    • Under-cured or on fresh paints
    • Gel coat due to the high rate of pad loading (material removal clogs pad prematurely)
    • Thin paints where the microfiber could be too aggressive
  5. Microfibre pads main advantages compared to “standard” foam pads:

    • Microfibre features substantially more surface area per square in/cm compared to foam materials or moreconventional fibres like wool.
    • The firm polyurethane molded substrate provides a consistent support behind the microfibre textile forbetter leveling of defects.

    Recommended applications for Microfibre Pads:

    • On hard paints.
    • Paint with severe defects or deeper scratches.
    • In situations where faster defect removal is desired.

    Applications not recommended for Microfibre Pads:

    • Under-cured or on fresh paints
    • Gel coat due to the high rate of pad loading (material removal clogs pad prematurely)
    • Thin paints where the microfiber could be too aggressive
    • The Yellow Medium Wool pad range features a consistent 15mm fibre length through the entirety of the pads surface.
    • The yellow foam of the Medium Wool pad is much more flexible to allow for improved control on curves and contours.
    • This soft and flexible wool, paired with a soft and flexible yellow foam backing, provides excellent cutting of moderate defects and excellent finishing ability on most surfaces.
    • This range is formulated for the rotary polishers maximum efficiency, paint shop safe and suitable for any car paint, refinish or OEM.
    • They are the result of accurate research on high quality abrasive powders, to obtain the correct mix of fast cutting and good finish.
  6. 981.089 RUPES 150mm Backing Pad for LK 900 Polisher

  7. This durable moulded plastic cable clamp is the ideal tool for helping you organise the cables on your machines. The ratchet system allows it to fit a variety of cable lengths and widths and keep your cables neatly bundled to avoid any potential damage or trip hazards. The bright red design with white Rupes Logo allows it to be easily seen if dropped, to avoid losing or damaging it.

  8. RUPES UNO PROTECT is an “all-in-one” compoundpolish, and protectant that can remove light defects and leave a high-glossprotected finish, in just one-step.

    UNO PROTECT produces rapid results with minimal effort making it the ideal solution for express detail services, high-volume detail shops, car dealerships, and auctions.

    Removes moderate-to-light defects in one step.Here are the main features and benefits of the new product:

    • Polishes the surface to a high gloss shine and color depth, thanks to a rich blend of polymer, silicone and carnauba.
    • Provides a durable protective layer, that lasts up to 90 days.
    • Easily to apply and remove.
    • Compatible with Random OrbitalGear Driven, and Rotary movements.
    • Cutting and finishing can be adjusted with pad and compound combination.
  9. Each RUPES twisted natural wool pad is constructed of a premium blend of 100% natural lamb’s wool and assembled with a precise strand length of 35mm. No synthetic fibers or fillers are used in the construction of the pad and each strand is steam set to ensure consistency and fastness of color. The RUPES’ twisted natural wool pads were developed to optimize the performance of RUPES Coarse Rotary Compound in an variety of applications and industries.

    Technical Specifications:

    • Blend of various 100% natural lamb’s wool with 0% of synthetic fibers.
    • Highly refined twisted strands ensure consistency across the entire pad surface
    • Maximized fiber density for increased surface area and optimal performance
    • Steam treated to set fibers and coloring after production
    • Available in 3 different diameters to suit common rotary applications
  10. Each RUPES twisted natural wool pad is constructed of a premium blend of 100% natural lamb’s wool and assembled with a precise strand length of 35mm. No synthetic fibers or fillers are used in the construction of the pad and each strand is steam set to ensure consistency and fastness of color. The RUPES’ twisted natural wool pads were developed to optimize the performance of RUPES Coarse Rotary Compound in an variety of applications and industries.

    Technical Specifications:

    • Blend of various 100% natural lamb’s wool with 0% of synthetic fibers.
    • Highly refined twisted strands ensure consistency across the entire pad surface
    • Maximized fiber density for increased surface area and optimal performance
    • Steam treated to set fibers and coloring after production
    • Available in 3 different diameters to suit common rotary applications
  11. Each RUPES twisted natural wool pad is constructed of a premium blend of 100% natural lamb’s wool and assembled with a precise strand length of 35mm. No synthetic fibers or fillers are used in the construction of the pad and each strand is steam set to ensure consistency and fastness of color. The RUPES’ twisted natural wool pads were developed to optimize the performance of RUPES Coarse Rotary Compound in an variety of applications and industries.

    Technical Specifications:

    • Blend of various 100% natural lamb’s wool with 0% of synthetic fibers.
    • Highly refined twisted strands ensure consistency across the entire pad surface
    • Maximized fiber density for increased surface area and optimal performance
    • Steam treated to set fibers and coloring after production
    • Available in 3 different diameters to suit common rotary applications
  12. 6153031360 Chicago Pneumatic Side Handle for CP8210 Polisher

    • The Yellow Medium Wool pad range features a consistent 15mm fibre length through the entirety of the pads surface.
    • The yellow foam of the Medium Wool pad is much more flexible to allow for improved control on curves and contours.
    • This soft and flexible wool, paired with a soft and flexible yellow foam backing, provides excellent cutting of moderate defects and excellent finishing ability on most surfaces.
    • The Yellow Medium Wool pad range features a consistent 15mm fibre length through the entirety of the pads surface.
    • The yellow foam of the Medium Wool pad is much more flexible to allow for improved control on curves and contours.
    • This soft and flexible wool, paired with a soft and flexible yellow foam backing, provides excellent cutting of moderate defects and excellent finishing ability on most surfaces.
  13. Microfibre pads main advantages compared to “standard” foam pads:

    • Microfibre features substantially more surface area per square in/cm compared to foam materials or moreconventional fibres like wool.
    • The firm polyurethane molded substrate provides a consistent support behind the microfibre textile forbetter leveling of defects.

    Recommended applications for Microfibre Pads:

    • On hard paints.
    • Paint with severe defects or deeper scratches.
    • In situations where faster defect removal is desired.

    Applications not recommended for Microfibre Pads:

    • Under-cured or on fresh paints
    • Gel coat due to the high rate of pad loading (material removal clogs pad prematurely)
    • Thin paints where the microfiber could be too aggressive
  14. Microfibre pads main advantages compared to “standard” foam pads:

    • Microfibre features substantially more surface area per square in/cm compared to foam materials or moreconventional fibres like wool.
    • The firm polyurethane molded substrate provides a consistent support behind the microfibre textile forbetter leveling of defects.

    Recommended applications for Microfibre Pads:

    • On hard paints.
    • Paint with severe defects or deeper scratches.
    • In situations where faster defect removal is desired.

    Applications not recommended for Microfibre Pads:

    • Under-cured or on fresh paints
    • Gel coat due to the high rate of pad loading (material removal clogs pad prematurely)
    • Thin paints where the microfiber could be too aggressive

Showing 1-36 of 88 results

per page
View as
Loading...