Power Tools

Showing 1-24 of 92 results

per page
View as
    • Heat guns for professional use
    • Dual position selection for temperature control: 350-500°C
    • Side handle mountable on both right and left sides
    • Protected motor for heavy jobs
    • Conical steel coupling
    • Electronic speed control with torque control
    • Soft start for gentle acceleration
    • Side handle mountable on both right and left sides
    • Protected motor for difficult jobs
    • Sponge and skin polishing
    • Side handle mountable on both right and left sides
    • Protected motor for difficult jobs
    • Sponge and skin polishing
    • LH 18ENS is the ugraded version of the LH18EN
    • Now comes with a spindle-lock button for quick accessory changes
    • 'Highly Recommended' in Sailing Today Magazine
    • Ideal for boat polishing and gel coat restoration
    • Spindle lock button for easy pad changes
    • Compant design great for detailing and hard to reach areas
    • Variable speed control
    • Increase torque at low speed due to double gearing reduction
    • Soft start feature for gentle acceleration
    • Dual function sander in normal position (3400 R.P.M.)
    • Polisher upside down (1600 R.P.M.)
    • Dual speed
    • Motor protected for difficult applications
    • Conical steel couple
    • Vertical sander designed for difficult jobs
    • Gear reduction (maintaining maximum torque)
    • Perfect balance for optimum stability
    • Powerful 900 W motor
    • Compact size
    • Shaft locking button for easy removal of disc
    • Motor coils protected with epoxy resin
    • Side handle mountable on both right and left sides
    • Fitted for connected to an extraction system
    • Soft start for gentle acceleration
    • Electronic speed control
    • 950 W motor
    • Compact size
    • Shaft locking button for easy removal of disc
    • Protected motor coils
    • Side handle mountable on both right and left sides
    • Electronic speed control with torque control
    • Soft start device
    • Side handle mountable on both right and left sides
    • Protected motor for heavy jobs
    • Conical steel coupling
    • Velcro pad for large surfaces (400 x 70 mm)
    • Powerful well-balanced grinders designed for smoothing and levelling surfaces
    • High abrasive-performance rating - Electronic module with speed control and overload protection
    • Fitted with connections to extraction systems - Pressure regulator eliminating the ‘blow back’ effect of the base-pad on the surface
    • Adjustable guide rollers for accurate movement of the tool along the surface
    • Easy calibration of the abrasive wheel and brush pressure
    • Designed for connection to an extraction system
    • Threaded roller-bearer shaft (M14) for use of abrasives and brushes for grinding and polishing
    • Constant maintenance of the desired speed thanks to the electronics and rpm preselect function
    • Electrical parts insulated with special resins for greater protection and longer lifetime of the tool
    • Practical easy to handle and a very reliable tool
    • Handle and Front grip to ensure comfortable and safe holding and optimal control of the machine during all milling operations
    • Electrical parts insulated with special resins
    • The geared rotary motion provides maximum removal rates and a significant saving of time and energy
    • Optimal capacity for the extraction of generated dust
    • Electrical parts insulated with special resins for better protection and longer tool life
    • Designed for connection to extraction systems
    • Pressure regulator eliminating the ‘blow back’ effect of the base-pad on the surface
    • Side handle mountable on both right and left sides
    • The geared rotary motion provides maximum removal rates and a significant saving of time and energy
    • Optimal capacity for the extraction of generated dust
    • Electrical parts insulated with special resins for better protection and longer tool life
    • Electronic module with speed regulator and overload control
    • Designed for connection to extraction systems
    • Pressure regulator eliminating the ‘blow back’ effect of the base pad on the surface
    • Speed regulator
    • Side handle mountable on both right and left sides
    • Speed control
    • Motor mounted on a vertical shaft to ensure stability and control
    • Powerful 450 W motor
    • Random orbital to ensure the best sanding results
    • Much reduced vibration levels thanks to optimal balancing
    • High speed and 3 mm orbit: good removal capacity and optimal surface finish (ER 03TE)
    • Fitted with an anti-spinning system which accelerates the disc gradually in the start-up phase thereby avoiding surface scuffing
    • Electronic module with rpm sensor to keep the rpm constant in all working conditions
    • Ergonomic handle with retractable switch
    • Equipped with the innovative RUPES 15-hole pad: maximum dust extraction capacity to protect the operator’s health Integrated self-generated dust-extraction system
    • Fitted for connection to extraction systems with pivotable connector
    • Motor mounted on a vertical shaft to ensure stability and control
    • Powerful 450 W motor
    • Random orbital to ensure the best sanding results
    • Much reduced vibration levels thanks to optimal balancing
    • High speed and 5 mm orbit: good removal capacity (ER 05TE)
    • Fitted with an anti-spinning system which accelerates the disc gradually in the start up phase thereby avoiding surface scuffing
    • Electronic module with rpm sensor to keep the rpm constant in all working conditions
    • Ergonomic handle with retractable switch
    • Equipped with the innovative RUPES 15-hole pad: maximum dust extraction capacity to protect the operator’s health - Integrated self-generated dust-extraction system
    • Fitted for connection to extraction systems with pivotable connector
    • Light and easy to handle sander
    • Self generated dust extraction
    • Random orbital motion to ensure the best grinding results
    • Much reduced vibration levels thanks to optimal balancing 5 mm orbit: high cut capacity
    • Fitted with an anti-spinning system which accelerates the pad gradually in the start-up phase, thereby avoiding surface scuffing
    • Electronic module with speed regulator and overload control
    • Soft start device
    • Equipped with the innovative RUPES 15-hole disc: maximum dust extraction capacity to protect the operator’s health
    • Disc quick-release button without using a key
    • Pressure regulator eliminating the ‘blow back’ effect of the base-pad on the surface
    • Speed regulator
    • Incorporated auto extraction system
    • powerful and aggresive ideal for smoothing and leveling systems
    • High torque motor with gear transmision
    • High abrasive performance rating
    • Available with rubber pad for rolled abrasives (SSCA) and with velcro pad for velcro abrasives (SSCAVR)
    • Electrical parts insulated with special resins for greater protection and longer tool life
    • Smoothing and leveling surfaces
    • Removing paint from wood
    • Prepairing surfaces for filling opperations
    • Filler grinding
    • Sanding primer and large surfaces
    • 950 W motor
    • Compact size
    • Shaft locking button for easy removal of disc
    • Protected motor coils
    • Side handle mountable on both right and left sides
    • Can be used with 3 - 6 - 6.35mm colletts
    • Reinforced shaft for maximum safety at work
    • Direct input motor to ensure high rpm
    • Electronic speed control
    • Soft start for gentle acceleration
    • Possibility of fitting accessories with shaft Ø 6 mm or, as an optional accessory, with Ø 3 mm or Ø 6.35 mm shaft
    • Reinforced shaft for maximum safety at work
    • Direct input motor to ensure high rpm

Showing 1-24 of 92 results

per page
View as
Loading...