Enquiry Form

Loading...
View as

Showing 1-36 of 684 results

Page
per page
Set Descending Direction
    • 960 ft.lbs / 1,300 Nm of max torque in reverse position 
    • One-hand reverse system (Ring system) 
    • 6.89 in. / 175 mm of length 
    • Hard anodized end plates / Hard chromium aluminum cylinder / Twin hammer mechanism 
    • 4.4 lbs – 2.0 kg thanks to its composite motor housing 
    • Name laser engraved at the back of the tool 
    • Curved handle with rubber material 
    • Resistant to most chemicals used in workshops 
    • Rubber grip at the back 
    • Does not slip when it is in operator’s hand even if it is dirty or oily
    • 610Nm Max Torque
    • Only 112mm (4.4") Long
    • Weighs 1.3Kg
    • Compact and Powerful
    • 4 1/2" (115mm) Heavy Duty Angle Grinder 
    • 12,000 RPM
    • Power: 0.8 Hp / (0.60 kW)
    • Spindle Thread: 3/8-24
    • 4" (100mm) Heavy Duty Angle Grinder
    • 12,000 RPM
    • Power: 0.8 Hp / (0.60 kW)
    • Spindle Thread: 3/8-24
    • 22,000 RPM
    • 1/4" and 3mm Collets included
    • Power: 0.40 hp / (0.30 Kw)
    • Weight: 0.57 Kg / (1.25 lbs)
  1. CP's expertise in impact wrenches, combined with their desire to make their customers’ daily lives easier, allow them to provide the first and only 1” torque limited impact wrench developed to prevent overtightened bolts on heavy vehicles.

    • Torque limited
    • Powerful in reverse
    • High operator comfort
    • High durability
    • Shock absorbing
    • Safe
    • Convenient
    • 1770 ft.lbs / 2400 Nm max torque in reverse for high productivity
    • 18.5 lbs. / 8.4 kg for reduced operator fatigue
    • Pinless closed reinforced rocking dog mechanism
    • Features an adjustable top or down exhaust
    • Regulator integrated in forward/reverse button with 3 power settings in both directions
    • Top or down exhaust, easy and quick to change
    • Four positions for D-handle placement to provide ultimate operator comfort
    • Forward/Reverse regulator with 3 power settings in both directions
    • Rubber bumper protecting both applications & tool (included)
    • 6" extended anvil
    • 1770 ft.lbs / 2400 Nm max torque in reverse for high productivity
    • 18.5 lbs. / 8.4 kg for reduced operator fatigue
    • Pinless closed reinforced rocking dog mechanism
    • Features an adjustable top or down exhaust
    • Regulator integrated in forward/reverse button with 3 power settings in both directions
    • Top or down exhaust, easy and quick to change
    • Four positions for D-handle placement to provide ultimate operator comfort
    • Forward/Reverse regulator with 3 power settings in both directions
    • Rubber bumper protecting both applications & tool (included)
    • 6.2 in / 158.7 mm length for restricted working areas
    • 6.6 lbs. / 3.0 kg for less operator fatigue
    • 1050 ft.lbs / 1420 Nm in reverse for high productivity
    • Side2Side forward and reverse system
    • Full teasing trigger
    • One hand Forward & Reverse speed regulator button
    • Steel motor
    • Twin Hammer mechanism
    • Aluminum housing
    • Ergonomic P-handle with full teasing trigger
    • Perfect weight distribution
    • 5.5 in. / 140 mm length, provides easier access to hard to reach places
    • 1.16 lbs. / 0.53 Kg
    • 80 ft.lbs. / 110 Nm in reverse
    • Double rocking dog mechanism & Aluminum housing
    • Power regulator in the back: 3 positions on both sides
    • Butterfly shift for forward / reverse
    • Built-in 180° air inlet swivel
    • Ideal tool for transmission and engine repair works, body panels, oil pans, ignitions, motor cycle repair and vehicle seats
    • 5.6 in - 146 mm length - 3.1 lbs - 1.4 Kg
    • Pin clutch mechanism in oil bath
    • Single handed push button forward / reverse
    • Curved handle with Thermo-Plastic Rubber injected in housing for a durable and comfortable grip.
    • Resistant to most chemicals used in workshops
    • 360° swivel air inlet
    • Teasing trigger
    • 670 ft. lbs. - 900 Nm max in reverse
    • Twin hammer mechanism and steel motor
    • Well balanced minimizing wrist strain
    • Ergonomic handle fits perfectly in the hand
    • Suited for all maintenance applications
    • Light vehicles tire changing operations
    • Light vehicles mechanical repair
    • MRO applications
    • 3 power settings in forward and one in reverse
    • 70 ft.lbs. / 95 Nm
    • 225 RPM
    • Advanced motor, full caged gear, and head design
    • Only 10.7in / 272mm long
    • Better access to restricted areas
    • 2.7 lbs. / 1.2 kg
    • Adjustable side exhaust avoids blowing dirt and dust
    • Ergonomic composite grip insulates operator’s hand from cold
    • Designed for a variety of applications from heavy ones such as transmission, suspension, work till light ones engine repair, dashboard work and general maintenance
    • Made in Japan
    • 70 ft.lbs. / 95 Nm
    • 225 RPM
    • Advanced motor, full caged gear, and head design
    • Only 10.7in / 272mm long
    • Better access to restricted areas
    • 2.7 lbs. / 1.2 kg
    • Adjustable side exhaust avoids blowing dirt and dust
    • Ergonomic composite grip insulates operator’s hand from cold
    • Designed for a variety of applications from heavy ones such as transmission, suspension, work till light ones engine repair, dashboard work and general maintenance
    • Made in Japan
    • 2.1 lbs. – 1.0 Kg
    • 346 ft.lbs - 470 Nm of maximum torque in reverse
    • 4 1/4 in – 107 mm length
    • Jumbo hammer mechanism
    • Steel motor
    • Aluminum clutch housing
    • Composite housing with curved handle with Thermo-Plastic Rubber injected
    • S2S: 1 hand Forward – Reverse operation
    • New power setting system: 1 hand-operation behind the trigger
    • 2 positions in reverse: max and lower torque
    • 2 positions in forward: max and low torque
    • Socket retainer ring
    • Full teasing trigger
    • 2400 Nm – 1770 ft.lbs maximum torque in reverse
    • Pin less closed reinforced rocking dog clutch mechanism
    • TPR handle & side handle - being able to rotate in 4 positions
    • Regulator integrated in forward/reverse knob with 3 positions power setting in both directions.
    • Rubber bumper protecting both applications & tool (included)
    • Socket retainer ring combined with hole retainer
    • Handle being able to rotate in 4 positions for ultimate operator comfort
    • Angled down exhaust blows air away from work place
    • 1500 Nm – 1100 ft / lbs
    • Well balanced minimizing wrist strain
    • Handle fits perfectly in the hand
    • Suited for all maintenance applications
    • Vans & Heavy vehicles mechanical repair
    • MRO applications
    • 1500 Nm – 1100 ft / lbs
    • Well balanced minimizing wrist strain
    • Handle fits perfectly in the hand
    • Suited for all maintenance applications
    • Vans & Heavy vehicles mechanical repair
    • MRO applications
    • 14.5 lbs. – 6.6 kg
    • 1300 ft.lbs. / 1760 Nm in reverse
    • Twin hammer mechanism
    • Steel motor
    • Intuitive Forward / Reverse lever & power regulator on both sides
    • 4 position power settings on both sides
    • Side handle with soft touch grip
    • Down exhaust
    • Aluminum housing
    • Composite cover on the clutch housing
    • Socket retainer ring
    • 14.5 lbs. – 6.6 kg
    • 1300 ft.lbs. / 1760 Nm in reverse
    • Twin hammer mechanism
    • Steel motor
    • Intuitive Forward / Reverse lever & power regulator on both sides
    • 4 position power settings on both sides
    • Side handle with soft touch grip
    • Down exhaust
    • Aluminum housing
    • Composite cover on the clutch housing
    • Socket retainer ring
    • 14.5 lbs. – 6.6 kg
    • 1300 ft.lbs. / 1760 Nm in reverse
    • Twin hammer mechanism
    • Steel motor
    • Intuitive Forward / Reverse lever & power regulator on both sides
    • 4 position power settings on both sides
    • Side handle with soft touch grip
    • Down exhaust
    • Aluminum housing
    • Composite cover on the clutch housing
    • Socket retainer ring
    • 14.5 lbs. – 6.6 kg
    • 1300 ft.lbs. / 1760 Nm in reverse
    • Twin hammer mechanism
    • Steel motor
    • Intuitive Forward / Reverse lever & power regulator on both sides
    • 4 position power settings on both sides
    • Side handle with soft touch grip
    • Down exhaust
    • Aluminum housing
    • Composite cover on the clutch housing
    • Socket retainer ring
    • Pistol Cushion clutch screwdriver
    • External clutch adjustment
    • Built-in 1/4" Female Hex quick-change
    • Convenient single handed forward/reverse
    • High torque 75 in.lbs (8.47 Nm)
    • Straight Cushion clutch Screwdriver
    • External clutch adjustment
    • Built-in 1/4" Female Hexagonal quick-change
    • Convenient one-hand forward/reverse valve
    • High speed 2000 rpm
    • Progressive lever start and suspension bail
    • Magnetic bit holder
    • Straight Cushion clutch Screwdriver
    • External clutch adjustment
    • Built-in 1/4" Female Hexagonal quick-change
    • Convenient single handed forward/reverse valve
    • High torque: 44 in.lbs (5 Nm)
    • Progressive lever start and suspension bail
    • Pistol Cushion clutch screwdriver
    • External clutch adjustment
    • Built-in 1/4" Female Hex quick-change
    • Convenient single handed forward/reverse
    • High speed 1,800 rpm
    • Perfect combo pack for General Mechanic operations combining ultra compact & powerful tools
    • Modular and Convenient
    • Robust & Durable
    • More information on each tool, please check out to CP7737 and CP7732C
    • Jumbo hammer mechanism
    • Steel motor
    • Composite cover
    • Direct drive transmission mechanism
    • 9.8 in -240 mm length & 3.46 in. (88 mm) height
    • 220 ft.lbs - 300 Nm of maximum torque in reverse (for 1/2’’ model)
    • 2.46 lbs. – 1.12 Kg
    • Over molded composite and ergonomic handle to fit perfectly in hand
    • Full teasing trigger
    • Single handed Forward – Reverse operation
    • 3 positions in forward and 1 in reverse
    • Socket retainer ring
    • Jumbo hammer mechanism
    • Steel motor
    • Composite cover
    • Direct drive transmission mechanism
    • 9.8 in -240 mm length & 3.46 in. (88 mm) height
    • 220 ft.lbs - 300 Nm of maximum torque in reverse (for 1/2’’ model)
    • 2.46 lbs. – 1.12 Kg
    • Over molded composite and ergonomic handle to fit perfectly in hand
    • Full teasing trigger
    • Single handed Forward – Reverse operation
    • 3 positions in forward and 1 in reverse
    • Socket retainer ring
    • 2.1 lbs. – 1.0 Kg
    • 460 ft.lbs - 625 Nm of maximum torque in reverse
    • 4 1/4 in – 108 mm length
    • Jumbo hammer mechanism
    • Steel motor
    • Aluminum clutch housing
    • Composite housing with curved handle with Thermo-Plastic Rubber injected
    • S2S: 1 hand Forward – Reverse operation
    • New power setting system: 1 hand-operation behind the trigger
    • 2 positions in reverse: max and lower torque
    • 2 positions in forward: max and low torque
    • Socket retainer ring
    • Full teasing trigger
    • 1/4" hexagonal Quick change
    • Double rocking dog clutch
    • Reversible one-hand
    • 1/4" hexagonal Quick change
    • Double rocking dog clutch
    • Reversible one-hand
    • 5.6 in - 146 mm length - 3.1 lbs - 1.4 Kg
    • Pin clutch mechanism in oil bath
    • Single handed push button forward / reverse
    • Curved handle with Thermo-Plastic Rubber injected in housing for a durable and comfortable grip.
    • Resistant to most chemicals used in workshops
    • 360° swivel air inlet
    • Teasing trigger
    • 5.5 in. / 140 mm length, provides easier access to hard to reach places
    • 1.16 lbs. / 0.53 Kg
    • 80 ft.lbs. / 110 Nm in reverse
    • Double rocking dog mechanism & Aluminum housing
    • Power regulator in the back: 3 positions on both sides
    • Butterfly shift for forward / reverse
    • Built-in 180° air inlet swivel
    • Ideal tool for transmission and engine repair works, body panels, oil pans, ignitions, motor cycle repair and vehicle seats
    • 3/8"- 24 spindle thread
    • High quality bevel gears & Governed motor
    • Robust steel keyless adjustable wheel rotative guard
    • 360° swivel air inlet
    • 1.1HP - 840 W
    • 1000 hour service interval
    • Rear exhaust (exhaust hose included)
    • Streamline CP Safety Lever
    • Streamline composite handle for either right or left handed operation
    • Composite grip insulates operator’s hand from cold
    • Designed for a variety of applications such as sanding with flap discs, grinding and cutting
    • 3/8"- 24 spindle thread
    • High quality bevel gears & Governed motor
    • Robust steel keyless adjustable wheel rotative guard
    • 360° swivel air inlet
    • 1.1HP - 840 W
    • 1000 hour service interval
    • Rear exhaust (exhaust hose included)
    • Streamline CP Safety Lever
    • Streamline composite handle for either right or left handed operation
    • Composite grip insulates operator’s hand from cold
    • Designed for a variety of applications such as sanding with flap discs, grinding and cutting
View as

Showing 1-36 of 684 results

Page
per page
Set Descending Direction