Foam Pads

Showing 1-24 of 35 results

per page
View as
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for most polishing requirements
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 6 inch / 150mm
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for all finishing requirements
    • Removes very light swirls & perfects gloss levels
    • Suitable for all types of automotive paintwork & marine gel coats
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing and light finishing
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing or light compounding
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Removes heavy to moderate swirls & scratches
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for all finishing requirements
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 6 inch / 150mm
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Removes heavy to moderate swirls & scratches
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 3 inch / 75mm
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing or light compounding
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 3 inch / 75mm
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing and light finishing
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 3 inch / 75mm
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for all finishing requirements
    • Removes very light swirls & perfects gloss levels
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 3 inch / 75mm

Showing 1-24 of 35 results

per page
View as
Loading...