Vehicle Detailing

Showing 1-36 of 132 results

per page
View as
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing or light compounding
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Optimum backing plate size - 6 inch / 150mm
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Low Profile Foam size : 130-140mm designed for 125mm/5" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • 150mm hard velcro backing pad
    • Single
    • Multi-hole
    • M8
    • Fits Rupes RH, BR and LHR 21ES
    • Removes upto 2500 grit sanding marks on fresh paint while being exceptionally easy to work with.
    • Can be used with most pad types including microfibre and waffle
    • Designed to eliminate moderate swirls, scratches, water spots and oxidation on all paint systems while providing a mirror-like finish.
    • Removes upto 3000 grit sanding marks
    • Can be used with most pad types including microfibre and waffle
    • Ultra fine abrasives smooth over minor imperfections including swirl marks and clay-induced marring in all paint systems.
    • Removes upto 1500 grit sanding marks on fresh paint while being exceptionally easy to work with.
    • Can be used with most pad types including microfibre and waffle
    • Designed to eliminate moderate swirls, scratches, water spots and oxidation on all paint systems while providing a mirror-like finish.
    • Can be used with most pad types including microfibre and waffle
    • Ultra fine abrasives smooth over minor imperfections including swirl marks and clay-induced marring in all paint systems.
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for all finishing requirements
    • Removes very light swirls & perfects gloss levels
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing and light finishing
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing or light compounding
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Removes heavy to moderate swirls & scratches
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Removes heavy to moderate swirls & scratches
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing or light compounding
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for heavy polishing and light finishing
    • Removes moderate to light swirls, scratches & blemishes
    • Suitable for all types of automotive paintwork & marine gel coats
    • Open cell structure
    • Beveled edge angled at 24 degrees for safer working
    • Centre hole for accurate centering on backing plate
    • Suitable for use with Velcro backing systems
    • Suitable for all finishing requirements
    • Removes very light swirls & perfects gloss levels
    • Suitable for all types of automotive paintwork & marine gel coats
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Completely new foam formulations specifically optimized for rotary applications.
    • The system includes 3 unique foam pads designed to give the operator choices depending on the desired outcome.
    • Open cell foam materials were chosen to minimize excessive heat.
    • The pad profile helps to prevent accidental contact between the backing plate and the panel.
    • 25mm thickness for each pad version available in 125mm/5", 150mm/6" or 165mm/6.5" backing pad sizes.
    • Low Profile Foam size : 150-165mm designed for 150mm/6" backing pads.
    • Only one thickness for every size: 15mm
    • This new foam pad rangehas been designed to maximize the transmission of the gear driven tools mechanical moevement to the work surface.
    • The low profile, tapered, design cut from the prorietary RUPES foams performs predictably and consistently with the movement of a dual action tool.
    • The shortened height of the foams improves user experience by reducing the overall distance from the operator to the work surface and also improves stability and control during all phases of the polishing process.
    • The lower profile aids in reducing pad distortion caused by the gear driven tools movement and torque output.
    • All the pads in the Course Wool range are constructed using two distinct fibre lengths (8mm light blue, 6mm white with different colours) creatin a dual density wool surface and a specific visible pattern.
    • This configuration provides a great balance of cutting power and finishing ability compared to traditional or single density wool pads.
    • The blue foam of the Course Wool pad is more rigid and densewhich maximises the translation of tool movement to the work surface, providing increased cutting power.

Showing 1-36 of 132 results

per page
View as
Loading...